GENERAL INFORMATION
00–00–6
FUNDAMENTAL PROCEDURES
CHU000000004E01
Preparation of Tools and Measuring Equipment
• Be sure that all necessary tools and measuring
equipment are available before starting any work.
Special Service Tools
• Use special service tools or equivalent when they
are required.
Disassembly
• If the disassembly procedure is complex,
requiring many parts to be disassembled, all parts
should be marked in a place that will not affect
their performance or external appearance and
identified so that reassembly can be performed
easily and efficiently.
Inspection During Removal, Disassembly
• When removed, each part should be carefully
inspected for malfunction, deformation, damage
and other problems.
CHU0014W003
49 SE01 310
WGIWXX0024E
WGIWXX0027E
WGIWXX0028E
To Next Page
Loading...
Need help?
General
