Mazda 13B-MSP - Rear Housing Assembly Note; Tension Bolt Assembly Note

MECHANICAL
01–10–40
Rear Housing Assembly Note
1. Assemble the rear housing with the rear stationary gear and the internal gear of the rotor engaged.
Caution
•
••
• Do not allow the side piece to be caught between the rotor housing and rear housing.
Tension Bolt Assembly Note
1. Apply engine oil to the tension bolt threads and
assemble to the housing with a new seal washer.
Caution
•
••
• Assemble a tension bolt which has a seal
washer with the rubber projection facing
the housing side.
2. Tighten the tension bolts in the order indicated in
the figure in 2

3 passes.
Tightening torque
31.4—39.2 N·m
{3.21—3.99 kgf·m, 23.2—28.9 ft·lbf}
GOOD
NO GOOD
CHU0110E060
WITHOUT SEAL
WASHER
INDENTED BOLT
HEAD
CHU0110E036
9
8
7
5
4
3
10
18
17
15
16
14
13
11
12
6
1
2
BHJ0110E094