Black plate (19,1)
qOperation
Seat Slide
To move a seat forward or backward, raise the lever and slide the seat to the desired
position and release the lever.
Make sure the lever returns to its original position and the seat is locked in place by
attempting to push it forward and backward.
Seat Recline
To change the seatback angle, lean forward slightly while raising the lever. Then lean back
to the desired position and release the lever.
Make sure the lever returns to its original position and the seatback is locked in place by
attempting to push it forward and backward.
Essential Safety Equipment
Seats
2-9
Mazda5_8DF6-EI-13J_Edition7 Page19
Thursday, March 9 2017 8:33 PM
Form No.8DF6-EI-13J
To Next Page
Loading...
