Fig. 12: Identifying Joint Molding Edge Specification
Courtesy of MAZDA MOTORS CORP.
11. Check for water leaks.
If a leak is found, wipe the water off well and repeat the installation.
WINDSHIELD MOLDING REMOVAL
1. Remove the windshield moldin
from the windshield.
2005 Mazda MX-5 Miata
2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata
Microsoft
Saturday, July 04, 2009 12:04:28 PM Page 12 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
