Mazda GENUINE SIDE UNDER SPOILER

This document provides comprehensive installation instructions and important information for the Genuine Mazda Side Under Spoiler, part number CC29 V4 910F, designed for the Mazda 5 vehicle. It covers everything from initial part verification and required tools to detailed installation steps, painting specifications, and post-installation inspection.

Function Description:

The Side Under Spoiler is an accessory designed to be installed on the side sill panel of the Mazda 5. While the document primarily focuses on installation, its function is typically to enhance the vehicle's aesthetic appeal by providing a sportier or more integrated look to the side profile. It is a cosmetic modification that complements the vehicle's design.

Important Technical Specifications:

Part Name: Side Under Spoiler
Part Number: CC29 V4 910F
Vehicle Compatibility: Mazda 5
Material (for painting): PP (Polypropylene)
Kit Contents:
- Side under spoiler (RH: C236 51 P40A, LH: C236 51 P50A) - 1 ea.
- Clip (small) (G18K 51 SJ3) - 24 pcs (pre-installed on spoiler)
- Clip (large) (BP4L 51 SJ3) - 6 pcs (pre-installed on spoiler)
- Rivet (B092 51 833) - 2 pcs
- Clip (BC1D 56 145) - 2 pcs
- Template (LH, RH) - 1 ea.
- Installation instructions - 1 pc.
Painting Specifications:
- Paint Type: Two-type, liquid-reacted paint.
- Application: Spray gun, apply evenly.
- Baking Time: 30 minutes at 90°C (194°F).
- Maximum Baking Temperature: Not more than 100°C (212°F) to prevent deformation of the PP material.
- Surface Treatment: Paint same as body color; no masking required.

Usage Features:

Installation: Requires two or more people.
Compatibility: Cannot be equipped together with mudguards.
Tools Required: Phillips screwdriver (stubby type), flathead screwdriver (wrapped with protective tape), duct tape, punch, electric drill (3 mm, 10 mm drill bits), round file, scissors, soft clean cloth, touch-up paint (genuine product), isopropyl alcohol (IPA), sealant.
Safety Precautions:
- Always cover the vehicle body with protectors or mats to prevent scratches and damage during installation.
- Use appropriate tools for each task to avoid damaging parts.
- Clean adhesive surfaces thoroughly and keep them free from dust or dirt to ensure proper adhesion.
- Place removed parts and kit accessories on a protective sheet to prevent scratches.
- Be careful when handling drills and other sharp objects. Wrap drill bits with duct tape to prevent scratching and over-drilling.
- Ensure proper alignment of the side under spoiler with the body, ensuring no gaps and equal height from front to back.
- When detaching the side under spoiler with templates affixed, be careful not to slip or rip the templates.
- The drill bit will be hot after drilling; exercise caution to prevent burns.
- Ensure all burrs around drilled holes are removed for a smooth surface.
- Apply sufficient sealant and touch-up paint to prevent rust after drilling.
- Do not insert clips completely into slots during initial installation; insert them only up to the center of the installation holes to allow for proper fitment.
- Push clips in slowly to avoid deformation.
- Ensure anti-rust protection is properly carried out.
Pre-installation Checks: Verify all parts are included and free of dirt, scratches, or damage.
Post-installation Checks: An "Installation Inspection Sheet" is provided to confirm clearance/fit, absence of scratches/dirt/remaining tape, proper tightening/engagement, and rust proofing. The term of validity for this sheet is 3 months.

Maintenance Features:

Painting: The accessory requires painting to match the vehicle's body color. Specific instructions are provided for paint type, application, and baking process to ensure durability and proper finish. After baking, the painted product should not be touched until it has cooled down completely.
Anti-rust Protection: Sealant and touch-up paint must be applied to drilled holes to prevent rust, ensuring the long-term integrity of the vehicle's body.
Documentation: The instructions emphasize keeping the manual for future reference, especially for installing other optional parts, removal of the accessory, or if the vehicle/accessory is resold. This suggests that proper maintenance or future modifications might refer back to these instructions.
Professional Assistance: If in doubt about installation or use, it is recommended to consult a Mazda dealer. For safety and reliability, installation, removal, and disposal by an Authorized Mazda Dealership are recommended. Mazda and its suppliers are not responsible for issues arising from failure to follow instructions.