Mazda MX-5 Miata 2005 - Page 18

Fig. 18: Bonding Protector To Body
Courtesy of MAZDA MOTORS CORP.
9. Apply primer onto the bonding area of the glass, body, and new windshield molding using a brush. Use
only glass primer on the glass and body primer on the body and molding. Allow the primer to dry for
approximately 30 minutes .
10. Appl
y
a 3.0 mm {0.12 in} bead of sealant between the
g
lass and the bod
y
.
2005 Mazda MX-5 Miata
2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata
Microsoft
Saturday, July 04, 2009 12:04:28 PM Page 18 © 2005 Mitchell Repair Information Company, LLC.