Fig. 2: Removing Beltline Molding
Courtesy of MAZDA MOTORS CORP.
5. Install in the reverse order of removal.
FRONT BELTLINE MOLDING REMOVAL/INSTALLATION
1. Remove the screws.
2. Pull front beltline molding upward to disengage the clips from the body and remove it.
2005 Mazda MX-5 Miata
2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata
Microsoft
Saturday, July 04, 2009 12:04:27 PM Page 2 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
