Fig. 20: Reshaping Sealant
Courtesy of MAZDA MOTORS CORP.
12. Install the windshield molding before the sealant has hardened.
13. Align the center mark in the molding with the glass mark (A).
14. Install the upper portions of the molding into the body (B).
15. Push the corners of the moldin
onto the bod
(C).
2005 Mazda MX-5 Miata
2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata
Microsoft
Saturday, July 04, 2009 12:04:28 PM Page 20 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
