Fig. 4: Removing Rear Window Molding
Courtesy of MAZDA MOTORS CORP.
REAR WINDOW MOLDING INSTALLATION
DETACHABLE HARDTOP
1. Apply protective tape along the edge of the body to protect it from damage.
2. Cut the sealant using a razor as shown.
WARNING:
Using a razor with bare hands can cause injury. Always wear
gloves when using a razor.
2005 Mazda MX-5 Miata
2005 ACCESSORIES & EQUIPMENT Exterior Trim - MX-5 Miata
Microsoft
Saturday, July 04, 2009 12:04:28 PM Page 4 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
