Mazda NAVIGATION SYSTEM - Getting Started

11
Getting Started
Activation
The following operation procedure is for activating the navigation system.
Note
While on the current position screen, press the Enter (up/down) switch up or down to change
the map scale.
Activating the Navigation System
1
With the ignition switched to ACC or ON, press the Navi switch on the steering
switch.
2
After a moment, the CAUTION screen is displayed.
3
Press the Enter (up/down) switch to switch the screen to MENU. ( page 14)
lIf you are in agreement with the CAUTION
statement, press the Enter (up/down) switch up or
down to set the cursor to .
Press the Enter (up/down) switch to switch the
screen to Current position.
lTo change the language, set the cursor to
. Press the Enter (up/down)
switch to switch the screen to LANGUAGE
SELECTION. ( page 12)
2%:':9)FSSO4EKI;IHRIWHE]7ITXIQFIV41