15
Getting Started
Navigation Set Up
lYou can alter the map display conditions, the route guidance conditions and show the
system information.
n Stop your vehicle before performing the following operations.
Do not change the settings and destination locations while driving. Minimize the time
spent viewing the monitor screen and listening to the voice guidance while driving.
Operating the system will distract the driver from looking ahead of the vehicle and may
cause an accident.
Always stop the vehicle in a safe location and set the parking brake before operating the
system.
Before Steps
select
Navigation Setup
Warning
Open the
[Navigation
Setup]
n Auto Zoom
The Auto Zoom function automatically switches the map scale depending
on the distance between the destination and the current position.
Used to switch the Auto Zoom function.
n Map Color
Used to switch the map mode.
n Map Direction
Used to switch the map direction.
While in Auto Zoom mode, the direction you are heading is
always displayed upward regardless of the set Map Direction.
n Show POI Icons
POI icons selected in Map Mode are displayed selecting the
desired category.
n Guidance Volume
Used to adjust the guidance volume.
Also adjustable using the audio volume knob during
transmission of the audio guidance.
Day: To switch to the daytime screen.
Night: To switch to the nighttime screen.
Auto: The daytime and nighttime screens
can be switched automatically while
the map mode is on.
North Up: Geographic north is up.
Head Up: The direction you are heading is
up.
2%:':9)FSSO4EKI8YIWHE]7ITXIQFIV41
To Next Page
Loading...
Need help?
General
