34
Explanation of signs
A triangle containing a lightning symbol indicates a health hazard e.g.
electric shock.
The exclamation mark in a triangle indicates to you particular risks in
handling, operating and control.
☞
The hand symbol indicates useful tips and additional comments about
use.
Safety Instructions and Hazard Warnings
The guarantee is rendered invalid when damage is incurred as a
result of non-compliance with the operating instructions! We shall
not assume any liability for consequential damage !
We do accept any liability for personal injury or damage to property
caused by incorrect handling or non-observance of the safety
instructions! In such cases the guarantee will lapse.
For safety and licensing reasons (CE), unauthorised conversion and/or
modification of the appliance is not permitted.
The product may not be exposed to extreme temperatures (<+10°C /
>+40°C).
The appliance should not be exposed to strong vibration or heavy
mechanical stress.
The appliance should not be exposed to excessive dampness such as,
from dripping or sprayed water.
The appliance is constructed according to protection class II.
This product has been designed for operation in a dry interior.
55
Troubleshooting
By purchasing this mixing desk you have acquired a product that has been designed
according to state of the art technology and that is operationally reliable.
Problems and malfunctions may, however arise.
We would therefore like to describe how you can repair certain malfunctions yourself.
Always adhere carefully to the safety instructions!
Problem Possible cause Elimination of the fault
Appliance not func- The mains adaptor plug is not
Mains adaptor plug and low-
tioning even after correctly plugged into mains volt plug should be correctly
having switched socket / the low voltage plug plugged in
the on/off switch has not been correctly plugged
on the rear of into the mixing desk
the mixing desk The AC/BATT switch indicates The AC/BATT switch
to the on position battery operation should not be pressed
during mains operation
The power display
does not light up
The on/off switch The appliance is on battery Use AC/BATT switch as
on the rear of power and the AC/BATT switch on/off switch
the mixing desk is pressed down (is on battery
does not function power).In this the AC/
BATT switch serves as
an oN/OFF switch
The power display No input signal available Check source of signal
lights up, but you The input level is on The input level of each
can hear no wrong setting channel should be correctly
sound set.
The "MAIN" control is turned Set the "MAIN" control to
right down correct setting
The channel fader is turned Set the channel fader to
right down the correct setting.
No signal can be The additionally connected Check the additio-
heard even appliance nally connected
though the levels (amplifier) has not appliance, select
display a signal switched on or is set correct input on amplifier
incorrectly dialing
The output is not connected Connect the output
or incorrectly connected as instructed
To Next Page
Loading...