10
MC Technologies Router program
An IP address can be allocated automatically to local equipment connected via Ethernet using DHCP (Dynamic Host
Configuration Protocol).
1.4.2 DHCP Server
DHCP Server
DHCP Server Disabled/Enabled: Click "Enabled" if the router should allocate the IP addresses to the connected
terminal equipment as the DHCP server at start-up.
Domain Name Domain name to be broadcast via DHCP.
Lease Time (d,h,m,s) Validity period of allocated network configuration.
Dyn. IP address Disabled/Enabled: Click "Enabled" if an IP address should be dynamically allocated to the connected
terminal equipment in a set range.
Begin IP Range Starting address for the address range from which IP addresses should be distributed.
End IP Range Ending address for the address range from which IP addresses should be distributed.
Static IP address Static allocation of the IP address using the MAC address.
allocation
Client MAC address MAC address of the terminal equipment.
Client IP address IP address of the terminal equipment. Static allocation of the IP addresses should not overlap with the
dynamic IP addresses. An identical IP address should not be used in multiple static allocations.
To Next Page
Loading...