For continuous connection monitoring, use "Connection Check" to check for a packet data connection in the mobile
service network. If the connection is lost, an action can be configured for establishing a new connection.
Note: Please note that frequent connection checks can lead to increased data traffic and corresponding costs.
1.5.8 Connection Check
18
MC Technologies Router program
The router IP address in the cellular network/Internet is allocated dynamically by the mobile service operator. A name
can be allocated to the dynamic IP address using a DynDNS provider, via which the router can then be reached over
the Internet. The DynDNS Client must be saved and activated in the router accordingly.
Note: For this to work, the provider must have allocated a public IP address to the router, not a private one.
This is not the case with all providers. DynDNS cannot replace a static IP address and has limited reliability.
1.5.7 DynDNS
DynDNS Set-up
Status Disabled: Deactivate DynDNS client.
Enabled: Activate DynDNS client.
DynDNS Provider Select the name of the provider with whom you are registered,
i.e. DynDNS.org, TZO.com, dhs.org., selfHost.de, custom DynDNS.
Use the "custom DynDNS" setting to select your preferred DynDNS provider.
Please also enter the provider’s server address under "DynDNS Server".
DynDNS Username Enter the username for your DynDNS account here.
DynDNS Password Enter the password for your DynDNS account here.
DynDNS Hostname The host name selected for this router for DynDNS service.
Your router can then be reached under this host name.
To Next Page
Loading...