8
MC Technologies Router program
Status information of I/O interfaces IN and OUT.
1.3.3 I/O Status
Input Signal Event
#1 Low: The signal is low. None: No event has been triggered.
High: The signal is high. SMS: An SMS is being sent.
E-Mail: An email is being sent.
Output Signal Event
#1 ON: Output active. Based on: Manual ON, Remote Controlled ON, Radio Net
work ON, P
acket Service ON, VPN Service ON, Incoming Call
ON or Connection lost ON.
Off: Output is not active.
Display of current routing table.
1.3.5 Routing Table
Status display of integrated ComSERVER
1.3.4 ComSERVER (only for MC Router with RS232 or RS485 interface on X1)
See also 1.9.6. ComSERVER
To Next Page
Loading...