SMS Configuration
SMS control Disabled: Remote control of router by SMS not possible.
Enabled: Remote control of router by SMS activated.
SMS Password SMS password for remote control.
SMS forward Disabled: Forwarding of SMS message via Ethernet not possible.
Enabled: Forwarding of SMS message via Ethernet activated.
Server IP address IP address to which the SMS message should be forwarded.
Server Port (default 1432) Port to which the SMS message should be forwarded.
Forwarding an SMS to a socket server
The router can forward received SMS messages to a terminal device through the Ethernet interface. A socket server
must be installed on the terminal device to receive XML files.
Under "SMS forward", click Enabled. Enter the recipient's IP address and the port of the terminal device you want to
talk to. The default value for the server is Port 1432. The received SMS is forwarded in the following example format:
Important note!
The call number should be included as an entry in the phonebook (see Page 34) in order for the router to identify it.
Example:
<?xml v
ersion="1.0"?>
<cmgr origaddr="+49172123456789" timestamp="10/05/21,11:27:14+08">
SMS message</cmgr>
origaddr = Sender's call number
timestamp = Time-stamp of the Service Centre in GSM 03.40 format
15
User Manual Web Interface MC-MRL/MC-MRL-4/MC-MRH/MC-MRH-4/MC-MRE/MC-MRE-4 - 05/2015
To Next Page
Loading...