McCulloch M125-97T User Manual

M185-117T
Original Instructions in English, all others are translations.
Instruction manual
Please read these in struc tions care-
ful ly and make sure you un der stand
them before using this ma chine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
fältig durch und vergewissern Sie sich,
daß Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le
manuel d'instructions. Assurez-vous
d'avoir tout compris avant d'utiliser ce
tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y com-
prenda estas intrucciones an tes
de usar esta maquina.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
ma chine gebruikt.
Euro
115 55 90-20 Rev. 2

McCulloch M125-97T Specifications

General

Cutting Width	97 cm
Cutting Height Range	38-102 mm
Transmission Type	Manual
Engine Manufacturer	Briggs & Stratton
Engine Type	PowerBuilt
Displacement	344 cm³
Engine Power	6.3 kW
Fuel Tank Volume	5.7 l
Fuel Tank Capacity	5.7 l
Wheel Size	Front: 15 inch, Rear: 18 inch

Summary

Safety Rules

I. TRAINING

II. PREPARATION

Reduce fire risk, inspect area, and handle fuel safely before use.

III. OPERATION

Safe practices for operating the machine, including slope limits and general precautions.

IV. MAINTENANCE AND STORAGE

Operation and Driving

Before Starting Procedures

Refueling, checking oil, and tire pressure before engine start.

Starting and Driving the Tractor

Safely start the engine, move forward/backward, and operate in different conditions.

Reverse Operation System (ROS)

Cutting Tips and Engine Shutdown

Achieve optimal cutting results and safely turn off the engine.

Maintenance and Adjustments

General Maintenance and Cleaning

Changing Oil and Service Schedule

Procedures for changing engine oil and following the maintenance schedule.

Mower Blades Service

Brake System Checks

Procedures to verify the proper functioning and stopping distance of the brake system.

Drive Belt Replacement

Troubleshooting

Engine Issues

Diagnose and resolve common problems with the engine starting, running, and overheating.

Machine Performance Issues