To Next PageTo Next Page
Need help?Do you have a question about the McCulloch M125-107T and is the answer not in the manual?
General| Engine Power | 6.3 kW |
|---|---|
| Cutting Width | 107 cm |
| Drive Type | Pedal-operated |
| Engine Manufacturer | Briggs & Stratton |
| Wheel Size | Front: 15 inches, Rear: 18 inches |
Operator training, concentration, and understanding of machine controls.
Preparing the machine before use, including fuel safety and inspection.
Guidelines for safe operation, including slope limits, turning, and stopping.
Instructions for maintaining and storing the equipment safely.
Instructions for installing and adjusting the steering wheel assembly.
Steps to install the tractor seat onto the seat pan.
Adjusting the seat for operator comfort and pedal access.
Steps for installing the tractor battery, including safety precautions.
Identification and explanation of the tractor's control layout and functions.
Description of the throttle control for engine speed and blade rotation.
Function of the clutch/brake pedal for declutching, braking, and starting.
How forward/reverse pedals control movement direction and speed.
How to engage and disengage the cutting unit drive.
How to quickly raise or lower the cutting unit.
Description of the ignition lock positions and their functions.
How to engage and disengage the parking brake.
How to use the free-wheel control lever for towing or pushing.
Instructions for operating the choke control for cold engine starts.
Instructions for safely filling the fuel tank with gasoline, including precautions.
How to check and maintain the engine oil level.
Recommended tire pressure for proper operation.
Step-by-step guide for starting the tractor engine safely.
Procedure to remove trapped air from the transmission system.
How to control tractor movement direction and speed using the drive pedals.
How to lower the cutting unit and select appropriate cutting speed.
Explanation and use of the Reverse Operation System for safe backing.
Advice for optimal cutting results, including obstacles and conditions.
Techniques for turning and directing grass discharge during cutting.
How to use the left side of the machine for close cutting.
Steps to safely shut down the tractor engine.
Regular checks and maintenance tasks to perform before operating the tractor.
Recommendations for cleaning the tractor, avoiding high pressure water.
Instructions for opening, removing, and reinstalling the engine hood.
How to clean the steering plate to ensure proper pedal and belt operation.
Step-by-step instructions for draining and refilling the engine oil.
A log for recording dates of completed regular service tasks.
Explanation and testing of safety systems related to operator presence and reverse operation.
Instructions for mower blade maintenance, sharpening, and replacement.
Steps for removing mower blades for maintenance.
Procedure to check the tractor's brake effectiveness and condition.
Step-by-step instructions for removing the mower deck from the tractor.
Instructions for reassembling the cutting unit onto the tractor.
Steps for removing and installing the mower drive belt.
Maintenance of the transmission, including cleaning cooling fins and fan.
How to use the deck washout port for cleaning the mower deck.
Common causes and solutions for an engine that fails to start.
Reasons why the starter motor may not engage or turn the engine.
Potential causes and fixes for an engine running unevenly.
Possible reasons for reduced engine power or performance.
Causes of engine overheating and how to address them.
Troubleshooting steps for a battery that is not charging.
Common issues and solutions for non-functional lighting.
Identifying and fixing sources of excessive machine vibration.
Diagnosing and rectifying issues causing uneven grass cutting.
Instructions for cleaning the tractor before storage.
Procedure for changing the engine oil as part of storage.
How to drain the fuel tank for safe storage.
Steps for removing and storing the battery safely.
Recommended indoor storage location for the machine.
Information needed when ordering spare parts or for warranty service.
