Do you have a question about the McCulloch M145-97TC and is the answer not in the manual?
Brand | McCulloch |
---|---|
Model | M145-97TC |
Category | Lawn Mower |
Language | English |
Learn and understand controls and proper use of equipment before operating.
Prepare the machine and area before use, inspect for debris and objects.
Follow safe practices for operation, including slopes, traffic, and attachments.
Keep equipment tight, store safely, and check components regularly.
Assemble and adjust steering wheel and its extension shaft.
Install and adjust tractor seat for comfort and proper pedal access.
Connect battery cables to the tractor, ensuring correct polarity and connections.
Assemble the grass bagger components, including frame and fabric loops.
Identify and understand the function of each control on the tractor.
Understand throttle, choke, cold starting, and ignition lock operation.
Learn to use clutch/brake, forward/reverse pedals, and parking brake.
Learn to connect/disconnect and lift/lower the cutting unit.
Properly fill the fuel tank with unleaded petrol outdoors, following safety precautions.
Check engine oil level and tire pressure before starting.
Start engine safely using brake pedal, parking brake, and safety switch.
Warm up the transmission for one minute in neutral before driving when cold.
Learn to move forward/backward, cut, use ROS, dump bagger, and convert mower.
Turn off engine by moving clutch to disengaged and key to STOP.
Perform battery maintenance: remove, clean, recharge, install.
Ensure blades are sharp for best cutting results and balance.
Level mower side-to-side and front-to-back for best cutting results.
Replace mower drive belt, ensuring correct routing and tension.
Diagnose and resolve issues preventing engine start or turnover.
Diagnose and resolve issues with engine running unevenly, weak performance, or overheating.
Troubleshoot battery, lighting, vibration, and uneven cutting problems.
Clean, service, and store machine properly for off-season.
Information needed for ordering replacement parts and contacting service.