Why won't my McCulloch MCC1435A start?
If your McCulloch Chainsaw won't start or starts but won't run, possible causes include incorrect starting procedures (refer to the User Manual for instructions), an incorrectly adjusted carburetor (have it adjusted by an Authorized Service Center), a fouled spark plug (clean, gap, or replace it), or a plugged fuel filter (replace the fuel filter).
Why does my McCulloch MCC1435A Chainsaw have low power?
If your McCulloch Chainsaw starts but the engine has low power, check the choke lever position (move it to the RUN position), the spark arrester screen (replace if dirty), and the air filter (remove, clean, and reinstall). Also, the carburetor mixture adjustment setting may be incorrect (have it adjusted by an Authorized Service Center).
Why is my McCulloch MCC1435A Chainsaw smoking so much?
If your McCulloch Chainsaw smokes excessively, it might be due to an incorrect carburetor mixture adjustment setting (have it adjusted by an Authorized Service Center) or an incorrect fuel mixture (use properly mixed fuel at a 40:1 mixture).
Details the safety mechanisms built into the chain saw for operator protection.
Explains how to prevent and react to sudden, dangerous chain saw movements.
Covers essential safety practices for operating the chain saw.
Provides broad safety guidelines for all users of chain saws.
Instructions on correctly adjusting the saw chain tension for safe operation.
Procedure to verify the proper functioning of the chain brake safety feature.
Essential checks to perform before starting the engine.
General| Engine Type | 2-stroke |
|---|---|
| Bar Length | 35 cm |
| Weight | 4.2 kg |
| Power Type | Gasoline |
| Chain Pitch | 3/8 in |
To Next Page