Why won't my McCulloch Chainsaw start?
If your McCulloch Chainsaw won't start or starts but won't run, possible causes include incorrect starting procedures (refer to the User Manual for instructions), an incorrectly adjusted carburetor (have it adjusted by an Authorized Service Center), a fouled spark plug (clean, gap, or replace it), or a plugged fuel filter (replace the fuel filter).
How to fix a McCulloch Chainsaw that runs erratically?
If your McCulloch Chainsaw runs erratically, the spark plug may be incorrectly gapped. Clean, gap, or replace the plug.
Why does my McCulloch MCC1635A have low power?
If your McCulloch Chainsaw starts but the engine has low power, check the choke lever position (move it to the RUN position), the spark arrester screen (replace if dirty), and the air filter (remove, clean, and reinstall). Also, the carburetor mixture adjustment setting may be incorrect (have it adjusted by an Authorized Service Center).
Why is my McCulloch MCC1635A Chainsaw smoking so much?
If your McCulloch Chainsaw smokes excessively, it might be due to an incorrect carburetor mixture adjustment setting (have it adjusted by an Authorized Service Center) or an incorrect fuel mixture (use properly mixed fuel at a 40:1 mixture).
What to do if my McCulloch Chainsaw engine hesitates?
If your McCulloch Chainsaw engine hesitates, the carburetor mixture adjustment setting may be incorrect. Have the carburetor adjusted by an Authorized Service Center.
General| Engine Power | 1.6 kW |
|---|---|
| Bar Length | 35 cm |
| Fuel Tank Capacity | 0.3 L |
| Oil Tank Capacity | 0.2 L |
| Engine Displacement | 35 cc |
| Power Type | Petrol |
| Bar Length (Alternative) | 14 in |
To Next Page