To Next PageTo Next Page
Need help?Do you have a question about the McCulloch MRT6 and is the answer not in the manual?
Engine Specifications| engine type | 4-stroke, 1 cylinder |
|---|---|
| engine displacement | 3.02 |
| engine speed | 3200 rpm |
Noise and Vibration| sound level | 97 dB(A) |
|---|---|
| operator ear noise level | 86 dB(A) |
| vibration level | 2.5 m/s² |
Weight and Dimensions| weight | 92 kg |
|---|---|
| transport wheel diameter | 40 cm |
| working width | 43 cm |
| working depth | 15 cm |
| blade diameter | 30 cm |
Read instructions, be familiar with controls and proper use.
Inspect area, remove objects, wear proper attire.
Work in daylight, be sure of footing, walk, not run.
Keep nuts/bolts tight, store safely, cool engine.
Insert handle lock, position handle assembly, secure with bolts.
Insert shift rod into lever indicator and secure with clip.
Reduce tire pressure to 20 PSI for proper operation.
Ensure engine oil is at the correct level before operation.
Use fresh, clean regular unleaded automotive gasoline.
Reconnect spark plug, set controls, pull starter rope.
Move throttle to desired speed; tines engage with drive control.
Release drive control, set throttle to slow, select 'R' position.
Release drive control to stop tines; set shift lever to 'N' to stop engine.
Release drive control, set throttle to slow, select 'F' position.
Release depth stake, select tilling position, engage drive control.
Destroy weeds between rows for plant nourishment.
Refer to manual for engine servicing and upkeep.
Lubricate right hand gear case grease fitting once a season.
Keep tiller and wheels clean; protect painted surfaces with wax.
Store in dry area, drain fuel system if unused for 30+ days.
Schedule for lubricating pivot points and performing checks.
Periodic checks and services for engine oil, filters, etc.
Adjust handle height for comfortable operation; it may change during use.
Take to an authorized dealer for repair.
Replace worn or damaged tines for optimal tilling performance.
Check fuel, throttle, choke, spark plug, wiring, and carburetor.
Check for overload, clogged tank, dirty air cleaner or spark plug.
Check air screen, oil level/quality, and engine cleanliness.
Wait for more favorable soil conditions if ground is too wet.
MRT6 Rear-mounted Cultivator.
Drag action of rotor blades; clutch controls on handlebar.
92 kg.
Diameter 40 cm, mounted in front of arrester bar.
Max. 43 cm.
Max. 15 cm, measured in cultivated soil.
4 Blades, diameter 30 cm.
190 r.p.m.
Adjustable.
4 stroke, single cylinder, 3.89 KW, @ 3200 r.p.m.
97 dB(A).
86 dB(A).
2.5 M/S².
HOP, Orangeburg USA.
