McCulloch ROB R800 User Manual

EN, English
Operator's manual
ROB R600, ROB R800, ROB R1000
Read the operator's manual carefully and make sure that you understand the instructions before
you use the product.

McCulloch ROB R800 Specifications

General

Type	Robotic lawn mower
Cutting Width	17 cm
Cutting Height, min-max	20-50 mm
Maximum Slope Performance	25%
Charging time	50 min
Maximum Area Capacity	800 m²
Battery Type	Li-ion
Battery Voltage	18 V
Battery Capacity	2.1 Ah
Engine Type	Electric
Cutting Height Adjustment	Manual
Typical mowing time on one charge	65 minutes

Summary

1.3 Product overview

1.3.1 Product Components Overview

1.3.2 Installation and Connectivity Parts

1.4 Symbols on the product

1.4.1 Safety Warnings

Important safety precautions indicated by symbols.

1.4.2 Operational & Maintenance Symbols

2 Safety

2.3 Safety Instructions for Operation (continued)

More operational safety rules for avoiding hazards and damage.

2.3.2 How to Lift and Move the Robotic Lawnmower (continued)

2.3.2 How to Lift and Move the Robotic Lawnmower

2.3.3 Maintenance Safety

2.2.1 Important Safety Precautions

Operator responsibility, child safety, power supply, battery handling.

2.3 Safety Instructions for Operation

Specific safety rules for operating the robotic lawnmower.

3 Installation

3.3.1 Best Charging Station Location (continued)

Further advice on charging station and power supply placement.

3.3.2 Connecting the Power Supply (continued)

3.5 Boundary Wire Installation (continued)

Details on how to lay the boundary wire using pegs or burying.

3.5.2 Working Area Boundaries (continued)

Boundary wire placement near paths, water, and slopes.

3.5.3.3 Slopes (continued)

3.6 Connecting the Boundary Wire

Step-by-step guide to connecting boundary wire to charging station.

3.7 Installation of the Guide Wire (continued)

Further guidelines for guide wire installation on slopes and curves.

3.7.1 Laying and Connecting the Guide Wire (continued)

Connecting the guide wire to the boundary wire using a coupler.

3.9 First Start-up and Calibration (continued)

Testing the mower's ability to dock with the charging station.

3.13 Timer Function (continued)

Provides timer suggestions for different lawn sizes and how to set them.

3.14 Installation Settings (ROB R800, ROB R1000)

3.14.3.1 Test OUT Function (continued)

Detailed procedure for testing remote start distances.

3.15.2 Security Level (continued)

3.1.1 Main Components for Installation

3.3 Charging Station Functions

3.3.2 Connecting the Power Supply

3.3.3 Installing and Connecting the Charging Station

Step-by-step guide to installing the charging station.

3.5.1 Plan Where to Lay the Boundary Wire

Guidelines for planning the boundary wire layout.

3.5.3 Boundaries within the Working Area

3.5.4 Laying the Boundary Wire

Methods for laying the boundary wire and initial cutting height.

3.7 Installation of the Guide Wire

How and why to install the guide wire for navigation.

3.7.1 Laying and Connecting the Guide Wire

Detailed steps for laying and connecting the guide wire.

3.8 Checking the Installation

How to check the loop signal using the charging station's indicator lamp.

3.10 Test Docking with the Charging Station

Performing a test to ensure successful docking with the station.

3.13.1 Timer Suggestions

Tables of recommended timer settings for ROB R600, R800, R1000.

3.14.1 Remote Start 1

How to use remote start 1 to reach distant lawn areas.

3.14.3.2 Test IN Function

3.15.2.3 Alarm Function

3.2 Preparations

3.3.1 Best Charging Station Location

Guidelines for choosing the optimal location for the charging station.

3.4 Charging the Battery

Instructions for charging the robotic lawnmower's battery.

3.5.2 Working Area Boundaries

How to lay the boundary wire near obstacles like walls or ditches.

3.5.3.3 Slopes

3.5.4.1 Eyelet for Connecting the Guide Wire

3.9 First Start-up and Calibration

Initial setup, language, country, time, date, PIN, and calibration.

3.11 Control Panel Overview

3.13 Timer Function

How to use the timer for scheduling mowing times.

3.13.2 Setting the Timer

Step-by-step instructions for setting work hours, days, and resetting the timer.

3.14.1.1 Proportion Setting

3.14.4 Drive Past Wire

3.15.3 New Loop Signal

3.16.5 Remote Start (ROB R600)

3.5 Boundary Wire Installation

Describes methods for installing the boundary wire.

3.5.4.2 Splicing the Boundary Wire

3.11.1 Instruction - Control Panel

3.14.1.2 Distance Setting

3.15 Security Settings

Settings for PIN code, security levels, and alarm.

3.16.6 Calibrate Guide (ROB R600)

3.14.2 Remote Start 2

3.15.1 Change PIN Code

3.16.1 ECO Mode

3.16.7 Reset User Settings

3.14.3 Test Settings

How to test installation settings for remote start.

3.15.2 Security Level

3.16.2 Time & Date Settings

3.14.3.1 Test OUT Function

Using Test OUT to measure distance to remote areas.

3.19 Yard Layout Examples

3.19.1 Open and Level Area

3.19.3 Islands and 25% Slope

3.19.6 Unsymmetrical Area with Passage and Islands

3.19.2 Open Area

3.19.4 L-shaped Garden with Islands

3.19.7 Three Areas Linked by Narrow Passages

3.19.5 U-shaped Garden with Narrow Passage

4 Operation

4.1 Main Switch

4.4 Stop Procedure

4.2 Start Procedure

Step-by-step guide to starting the robotic lawnmower.

4.5 Switch Off Procedure

4.7 Charge a Flat Battery

4.3 Operation Selection

Explains the HOME, AUTO, and MAN operation modes.

4.6 Timer and Standby

4.8 Adjust the Cutting Height

4.6.2 Setting the Timer

5 Maintenance

5.1 Introduction to Maintenance

5.3.1 Replacing the Blades

Detailed step-by-step guide for replacing the blades.

5.2 Clean the Robotic Lawnmower

5.4 Battery Information

5.2.1 Chassis and Blade Disc Cleaning

5.4.1 Replacing the Battery

Step-by-step guide for replacing the battery.

5.3 Replace the Blades

Safety warnings and steps for replacing the blades.

6 Troubleshooting

6.2 Error Messages and Solutions (continued)

Lists additional error messages, their causes, and solutions.

6.3 Indicator Lamp in the Charging Station (continued)

6.4 Symptoms and Solutions (continued)

Lists additional symptoms and their corresponding solutions.

6.5 Find Breaks in the Loop Wire (continued)

Final steps for replacing damaged wire sections.

6.2 Error Messages and Solutions

Lists common error messages, their causes, and solutions.

6.3 Indicator Lamp in the Charging Station

6.4 Symptoms and Solutions

Lists common symptoms and how to resolve them.

6.5 Find Breaks in the Loop Wire

8 Technical Data

8.1 Technical Data - Dimensions, Electrical, Boundary Wire

8.1 Technical Data - Mowing and IP Classification