McCulloch ROB S600 Quick Guide

McCulloch ROB S600

4 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

McCULLOCH Robotic Mower

ROB S400/S500/S600

QUICK GUIDE

QG_P01_MCC_1141738-26.indd 1QG_P01_MCC_1141738-26.indd 1 2020-01-10 14:09:462020-01-10 14:09:46

Other manuals for McCulloch ROB S600

Operator's Manual56 pages

Questions and Answers:

R
Ruth HawkinsAug 21, 2025
How to fix no loop signal on McCulloch ROB S600 Lawn Mower?
- J
  johnclineAug 22, 2025
  If your McCulloch Lawn Mower displays a 'No loop signal' error, several issues could be the cause. First, verify the power supply is correctly connected to the wall socket and that the low voltage cable is undamaged and properly connected to the charging station. Check the boundary wire connections to the charging station and inspect the boundary wire for any breaks, replacing any damaged sections. Ensure ECO mode is not activated while the mower is outside the charging station. Also, confirm the boundary wire isn't crossed, especially around any islands, and if the signal is broken, place the product in the charging station and generate a new loop signal.
C
Curtis TapiaAug 23, 2025
What to do if McCulloch ROB S600 Lawn Mower battery is empty?
- K
  Karen BrockAug 23, 2025
  If your McCulloch Lawn Mower shows an empty battery, make sure the charging station and guide wire are correctly installed. Check if the guide wire is broken or not properly connected. If these steps don't resolve the issue, the battery might be spent and require replacement. Also, check if the indicator lamp in the charging station flashes red, which could indicate a defective charging station antenna.
J
john81Aug 25, 2025
Why McCulloch Lawn Mower is not driving?
- Z
  zbrownAug 25, 2025
  If your McCulloch Lawn Mower isn't driving, it might be caught on something; free it and address the cause. If wet grass is the issue, wait for the lawn to dry. For work areas with steep slopes, these areas should be isolated. If a guide wire is on a slope, ensure it is laid at an angle across the slope.
J
James GreenAug 26, 2025
What to do if McCulloch Lawn Mower cutting system is blocked?
- F
  Franklin PittsAug 26, 2025
  If the cutting system of your McCulloch Lawn Mower is blocked, it might be due to grass or another object wrapped around the blade disc; inspect and remove any obstructions. Also, ensure the blade disc isn't sitting in a pool of water; relocate the product and prevent water accumulation. Finally, if the grass is too high, cut it before using the product, ensuring it's no more than 4 cm / 1.6 in.
Y
ysmithAug 27, 2025
Why McCulloch ROB S600 Lawn Mower is outside working area?
- P
  Patrick AdkinsAug 27, 2025
  If your McCulloch Lawn Mower is operating outside the designated working area, the boundary wire connections to the charging station may be crossed; ensure they are correctly connected. Check that the boundary wire is laid according to the provided instructions and isn't too close to the work area's edge. Interference from metal objects or buried cables nearby could also be a factor, so try moving the boundary wire. If another product installation is nearby, place your product in the charging station and generate a new loop signal.
M
Michelle RobersonAug 29, 2025
What to do if McCulloch ROB S600 Lawn Mower wheel motor is blocked?
- M
  Mary AllenAug 29, 2025
  If the wheel motor on your McCulloch Lawn Mower is blocked, check the drive wheel for grass or other objects wrapped around it and remove any obstructions.
T
Terry ReedAug 30, 2025
What to do if McCulloch ROB S600 Lawn Mower is trapped?
- G
  garciajamesAug 30, 2025
  If your McCulloch Lawn Mower is trapped, free it and identify what caused it to get stuck. If it's stuck behind multiple obstacles, assess the area and remove any obstructions or create an island around them to allow free movement.
V
vazquezchadSep 1, 2025
Why McCulloch Lawn Mower is stuck in charging station?
- T
  Tanya BryantSep 1, 2025
  If your McCulloch Lawn Mower is stuck in the charging station, there may be an object preventing it from leaving. Remove the object to allow the product to move freely.
D
Diane DuncanSep 2, 2025
What to do if McCulloch ROB S600 Lawn Mower is lifted?
- S
  Sharon RiceSep 2, 2025
  If your McCulloch Lawn Mower displays a 'Lifted' message, it means the lift sensor has been activated. Ensure the product body can move freely around its chassis. Remove any objects that may cause the chassis to lift or create an island around such objects.
J
Jordan RodgersSep 4, 2025
How to resolve guide not found error on McCulloch ROB S600 Lawn Mower?
- B
  bsanchezSep 4, 2025
  If your McCulloch Lawn Mower displays a 'Guide not found' error, ensure the guide wire connector is tightly connected to the charging station. Check for any breaks in the guide wire, and if found, replace the damaged section. Also, verify that the guide wire is correctly connected to the boundary loop.

McCulloch ROB S600 Specifications

General

Type	Robotic lawn mower
Noise level	57 dB
Cutting width	160 mm
Grass catcher	No
Product color	Black, Yellow
Number of blades	3
Number of wheels	3 wheel(s)
Maximum lawn area	600 m²
Mulching function	-
Maximum cutting height	50 mm
Minimum cutting height	20 mm
Suitable for slope up to	35 %
Automatic base station return	Yes
Power source	Battery
Charging time	1 h
Battery capacity	2 Ah
Battery life (max)	65 min

Weight and Dimensions

Depth	550 mm
Width	380 mm
Height	230 mm

Related product manuals

McCulloch ROB S800

Preview: McCulloch ROB S400

McCulloch ROB S400

McCulloch ROB S500

Preview: McCulloch ROB R600

McCulloch ROB R600

Preview: McCulloch ROB R800

McCulloch ROB R800

McCulloch ROB R1000

McCulloch RE20H107RBK

McCulloch M51-650 CMDW-R

McCulloch M53-675 CMDW-R

Preview: McCulloch HURRICANE 125 RB

McCulloch HURRICANE 125 RB

Preview: McCulloch 532 43 18-99 Rev. 1

McCulloch 532 43 18-99 Rev. 1

McCulloch 532 43 37-12 Rev. 1