Need help?Do you have a question about the McIntosh C32 and is the answer not in the manual?
General| Type | Stereo Preamplifier |
|---|---|
| Frequency Response | 20Hz to 20kHz (+0, -0.5dB) |
| Input Sensitivity | 2.5mV (MM), 250mV (line) |
| Weight | 25 lbs |
| Input Impedance | 47k ohms (MM), 100k ohms (line) |
| Output | 2.5V (Preamp Output) |
How to use input selector switches and the mode selector for listening adjustments.
Operating the equalizer frequency controls and balance knob for sound tuning.
Adjusting the loudness control for optimal sound at low volumes.
Using the expander to correct compression and enhance dynamic range.
Function of PHONO 1-2 and RECORD MONITOR pushbuttons for input selection and monitoring.
How EQ OUT, LF/HF FILTERS, and SPEAKER/OUTPUT pushbuttons affect signal processing.
Explanation of the C32's dual program lines and electronic input switching technology.
Details on the precise volume control and active loudness compensation circuit.
Description of active filter, program equalizer, and bypass circuit functions.
Explanation of the logarithmic expander and the independent record program line system.
To Next Page
