Need help?Do you have a question about the McIntosh C33 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Signal-to-Noise Ratio (Phono) | 80 dB |
| Signal-to-Noise Ratio (High Level/Line) | 100 dB |
| Input Sensitivity (MC) | 0.25 mV |
| Input Sensitivity (MM) | 2.5 mV |
| Input Sensitivity (High Level/Line) | 0.25V |
| Output Voltage (Main Output) | 2.5 V |
| Output Voltage (Record Output) | 0.25V |
| Input Impedance (Phono) | 47k ohms |
| Output Impedance (Main Output) | 100 ohms |
| Type | Preamplifier |
| Frequency Response | 20Hz - 20kHz (+0, -0.5dB) |
| Dimensions | 16 x 5.5 x 15.5 inches |
Instructions for unpacking the unit and preparing the cabinet panel for installation.
Details on marking and preparing the cabinet panel for equipment mounting.
Procedures for drilling mounting holes and cutting the equipment panel.
Instructions for attaching mounting strips, brackets, and securing the unit.
How to connect turntables, tuners, tape recorders, AUX, and front panel jacks.
Guide for connecting external processors and power amplifiers to the C 33.
Details on speaker relays, monitor amplifier, AC power, and turntable auto-on.
Instructions for AC power, turntable auto-on, and fuse information.
How to use the LISTEN/RECORD selector and MODE selector switches.
Guide to using the equalizer frequency and balance/loudness controls.
How to adjust loudness compensation and operate the Compandor System.
Detailed usage of the Compandor as an expander and compressor.
How to use the LF, HF filters and REC MONITOR pushbutton.
Operation of SPEAKER/OUTPUT 1 and 2 pushbuttons for speaker selection.
How speaker pushbuttons work with SCR and the function of the POWER ON button.
Explanation of Compandor controls and tuning the Auto-On sensitivity.
How to use the monitor amplifier for headphones and line output.
Detailed technical specifications for both preamplifier and monitor sections.
Semiconductor complement, power outlets, size, finish, and mounting details.
Charts showing frequency response, loudness control effects, and equalizer response.
Technical details on the phono stage and electronic input switching.
Explanation of the signal path for the listen program line.
Technical explanation of the record path, compandor, and filters.
Technical description of the monitor amplifier and auto turn-on circuit.
To Next Page
