Need help?Do you have a question about the McIntosh C2300 and is the answer not in the manual?
General| Output level | 45 mV |
|---|---|
| Amplifier class | - |
| Frequency range | 10 - 100000 Hz |
| Input sensitivity | 4.5 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | 93 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| XLR in | Yes |
| XLR out | 3 |
| Headphone outputs | 1 |
| Line inputs (RCA) | 6 |
| Line outputs (RCA) | 4 |
| Headphone connectivity | 6.3 mm |
| Speakers connectivity type | RCA |
| Purpose | Home |
| Product color | Black |
| Volume control | Rotary |
| Connectivity technology | Wired |
| AC input voltage | 120 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 75 W |
| Package weight | 20410 g |
Weight and Dimensions| Depth | 457.2 mm |
|---|---|
| Width | 444.5 mm |
| Height | 193.7 mm |
| Weight | 13.41 g |
Details on XLR, Power Control, Trigger, and Data Port connectors and associated cabling.
Guide on how to access and navigate the C2300's setup menu.
Overview of factory default settings and how to check the firmware version.
Instructions for adjusting input source volume levels for consistent output.
Procedure for renaming input sources on the front panel display.
Instructions for turning the front panel meter illumination on or off.
Adjusting display brightness and configuring power control trigger assignments.
Settings for accessory power, tube LED status, and passthru mode configuration.
Steps for powering on the unit and selecting audio input sources.
Adjusting the listening volume and speaker balance levels.
Introduction to the trim functions for fine-tuning audio parameters.
Using Bass, Treble controls and activating the Tone Bypass feature.
Fine-tuning input source volume levels using trim controls.
Configuring meter lighting and adjusting phono input settings.
Operating mono mode, mute function, and tone bypass.
Using record monitor, accessing setup, and mute operations.
Managing audio outputs and connecting headphones for private listening.
Procedure for recording audio and resetting the device's microprocessors.
Explanation of the electromagnetic switching technology used for signal routing.
Details on the MC and MM phono preamplifier circuits and their capabilities.
Description of the tone control circuit, its attenuation, and bypass functionality.
Technical insights into the C2300's volume control system and its precision.
Explanation of the meter's electronic circuitry for accurate signal level indication.
Information on the regulated power supplies and R-core transformer.
To Next Page
