Need help?Do you have a question about the McIntosh C26 and is the answer not in the manual?
General| Type | Stereo Preamplifier |
|---|---|
| Total Harmonic Distortion | 0.1% |
| Signal to Noise Ratio | 90dB |
| Weight | 22 lbs |
| Frequency Response | 20Hz to 20kHz (±0.5dB) |
| Input Sensitivity | 250mV (line) |
| Output | 2.5V |
| Dimensions | 16 x 5.25 x 12 inches (W x H x D) |
Details the PANLOC professional mounting system for securing the C 26.
Instructions for connecting turntables to PHONO 1 inputs.
Steps for connecting tape decks for recording and playback.
How to link the preamplifier to power amplifiers.
Explanation of the loudness compensation for low-frequency boost.
How to use tape monitor switches for A/B comparison of recordings.
Operation of the TAPE 1 pushbutton for source or playback.
Operation of the TAPE 2 pushbutton for source or playback.
Controlling main and remote speaker systems via pushbuttons.
Details on the PANLOC mounting system for installation and access.
Steps for listening to stereo records.
Instructions for copying audio between tape recorders.
To Next Page
