Need help?Do you have a question about the McIntosh C2600 and is the answer not in the manual?
General| Signal to Noise Ratio | 100dB |
|---|---|
| Phono Stage | Yes |
| Digital USB Input | 1 |
| Digital MCT Input | 1 |
| Vacuum Tube | Yes |
| Type | Tube Preamplifier |
| Frequency Response | 20Hz - 20kHz (+0, -0.5dB) |
| Phono Inputs | 1 Moving Magnet 1 Moving Coil |
| Outputs | 3 Total |
| Output Impedance | 100 ohms |
| Dimensions | 17.5" (44.45cm) x 6" (15.24cm) x 18" (45.72cm) |
| Headphone Output | 1/4" High Drive with Headphone Crossfeed Director (HXD®) |
Lists numbered safety instructions for operating the equipment safely and correctly.
Highlights warnings related to electrical shock, fire risks, and proper equipment usage.
Identifies and describes all rear panel input and output connectors for system integration.
Offers guidance on connecting various audio and control components to the C2600.
Details the steps to reset all adjustable settings to their factory defaults.
Guides the installation of necessary drivers for PC-based USB audio playback.
Comprehensive technical data including frequency response, THD, and input sensitivity.
To Next Page
