Need help?Do you have a question about the McIntosh C2500 and is the answer not in the manual?
General| Total Harmonic Distortion | 0.08% |
|---|---|
| Signal to Noise Ratio | 100dB |
| Rated Output Voltage | 2.5V unbalanced, 5V balanced |
| Maximum Output Voltage | 8V unbalanced, 16V balanced |
| High Level Voltage Gain | 15dB |
| Type | Vacuum Tube Preamplifier |
| Inputs | 6 unbalanced, 2 balanced, 1 phono MC, 1 phono MM |
| Outputs | 3 unbalanced, 2 balanced |
| Weight | 29 lbs (13.2 kg) |
| Input Impedance | 47k ohms |
| Phono Voltage Gain | 40dB (MM), 60dB (MC) |
| Frequency Response | +0, -0.5dB from 20Hz to 20, 000Hz +0, -3dB from 10Hz to 100, 000Hz |
Key safety guidelines for operating the equipment, including warnings about fire and electrical shock.
Details on various connectors like XLR, Power Control, Data Ports, and RS232 DB9 pin layout.
Chart listing factory default settings for various C2500 functions and their corresponding pages for more information.
Procedure for switching the C2500 on and off using the front panel or remote control.
How to select the desired audio source using the front panel or remote control.
Adjusting the listening volume level using the front panel or remote control.
Overview of available Trim Selections for audio adjustments.
To Next Page
