10
Displays On Screen Functions on the
McIntosh Music Server and a variety
of other McIntosh Components
Remote Control Push-Buttons
Press to Power the C2500 ON
Selects one of the eight
available Audio Sources
Selects a Disc Player, Music Server
or Recorder Function. Seek Sta-
tions Up or Down the AM/FM Dial.
Select AM/FM Station Presets and
performs various functions on a
variety of McIntosh Components
Use to select tuner presets, disc
tracks or any numbered operation
Mutes the audio
Adjusts the volume level up or down
Selects On Screen Functions on a
variety of McIntosh Components
Selects AM Tuner Operating
Functions and Disc Selection on
certain McIntosh Disc Players
Selects FM Tuner Operating Func-
tions and Track Selection on certain
McIntosh CD Players
Press to change broadcast bands on
an external McIntosh Tuner con-
nected. Select certain functions on a
variety of McIntosh Components
Switches the Trigger 1 and/or 2
Power Control Jack(s) On/Off, refer
to “Setup, Power Control TRIG 1
and TRIG 2” on page 18 for addi-
tional information
Note: Push-buttons whose function is not identified above are for use with other McIntosh Products.
LED illuminates during the time a
remote command is sent to the C2500
Press TRIM and then the LEVEL
Push-buttons to select and adjust
various functions
Selects Functions as a “shift” key
when used with the AM or FM
push-buttons to select Output 1
or 2
Press to Power the C2500 OFF
Scrolls through the
available C2500 Inputs
Scrolls through the
available C2500 Inputs
Activates the TRIM
Stereo/Mono Mode
To Next Page
Loading...
Need help?
General
