Need help?Do you have a question about the McIntosh C27 and is the answer not in the manual?
General| Frequency Response | 20 Hz to 20 kHz ±0.5 dB |
|---|---|
| Total Harmonic Distortion | 0.05% |
| Input Sensitivity | 2.5mV (MM), 250mV (line) |
| Type | Preamplifier |
| Input Impedance | 100 kΩ |
| Output Impedance | 100 ohms |
Critical warning to prevent fire or shock hazard by avoiding exposure to rain or moisture.
Instructions for connecting the C27's main outputs to stereo power amplifiers.
Details on connecting speakers, speaker switching, and the headphone jack.
Explanation of tape monitoring, recording, and copying between recorders.
Maximum deviations from perfection guaranteed by McIntosh for the C27 unit.
Lists key parameters like frequency response, distortion, input/output levels, and power requirements.
Detailed explanation of input routing, phono preamplifier, and tape switching circuits.
Technical overview of volume, filters, loudness, balance, and bass/treble control circuits.
To Next Page
