Need help?Do you have a question about the McIntosh C47 and is the answer not in the manual?
General| Type | Solid State Preamplifier |
|---|---|
| Total Harmonic Distortion | 0.003% |
| Power Consumption | 30 watts |
| Frequency Response | 20Hz - 20kHz (+0, -0.5dB) |
| Phono Stage | Yes |
| Digital Inputs | 2 Coax, 2 Optical, 1 USB |
| USB Input | Yes |
| Headphone Output | Yes |
| Weight | 25 lbs (11.3 kg) |
| S/N Ratio | 100dB |
| Signal to Noise Ratio | 100dB (Line), 80dB (Phono) |
| Gain | 15dB (High Level), 40dB (Phono) |
| Output Impedance | 200 Ohms |
| Inputs | 1 Balanced, 3 Unbalanced, 1 Phono MM |
| Dimensions | 17-1/2" (44.45cm) wide, 6" (15.24cm) high (including feet), 18" (45.72cm) deep (including front panel and cables) |
Essential guidelines for safe operation and maintenance.
Details on various connectors and recommended cables.
Overview of the C47's advanced features.
Guidance on connecting various audio and control components.
How to enable/disable inputs and rename them.
How to choose between different audio input sources.
Adjusting audio parameters like balance, tone, and input levels.
Steps for connecting and installing drivers for USB audio playback.
Details on what is covered, limitations, and the warranty period.
To Next Page
