11
MQ112
Packing Instructions Part List
Qty Part Number Description
1 033838 Shipping Carton
2 034669 End Caps
1 033836 Inside Carton
1 033725 Top Pad
1 034576 Bottom Pad
1 034547 Bottom Pad Filler
4 017937 Plastic Feet
4 404080 #10 Flat Washers
In the event it is necessary to repack the equip-
ment for shipment, the equipment must be packed
exactly as shown below.
It is very important that the four plastic feet
are attached to the bottom of the equipment.
This will ensure the proper equipment location
on the bottom pad. Failure to do this will result
in shipping damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition.
If a shipping carton or any of the interior part(s)
are needed, please call or write Customer Service
Department of McIntosh Laboratory. Refer to
page 2. Please see the Part List for the correct part
numbers.
TOP PAD
UNIT WITH
(4) FEET ON
BOTTOM COVER
PLASTIC
FOOT (4)
10-32 X 3/4”
SCREW WITH
WASHER (4)
BOTTOM PAD
BOTTOM PAD
FILLER
INSIDE
CARTON
IMPORTANT
(READ ABOVE)
END CAPS
SHIPPING
CARTON
To Next Page
Loading...