6
Rear Panel Connections and Switches
Connect to AC Outlet
2. POWER CONTROL
McIntosh component when the front panel
POWER knob is set to REMOTE.
McIntosh component.
3. EQ CONTROL receives an IN / OUT
command from another McIntosh component
when the front panel EQ CONTROL knob is set
to TRIG.
1. AUTO OFF when set to ENABLE, the unit will
power itself down if no audio signal is present
at the input for at least 30 minutes. When set to
DISABLE, the unit will remain on until manually
When the front panel POWER knob is set to
REMOTE, the AUTO OFF function is automati-
cally disabled.
4. OUTPUT 2
BALANCED and UNBALANCED connections
MODE selects between left and right STEREO
and MONO audio modes for OUTPUT 2.
5. OUTPUT 1 BALANCED and UNBALANCED
-
sor loop input.
6. INPUT for BALANCED and UNBALANCED
connections from audio sources.
To Next Page
Loading...