3
MQ112
Performance Features
• User Preferred Equalization
The MQ112 uses the latest in technology to
restore musical balance to audio systems located
in rooms with less than ideal acoustics.
• Multiple Outputs
The MQ112 has two sets of unbalanced and
stereo or mono to provide convenient connection
of a powered subwoofer.
• Power Control
The power control input connection provides
MQ112 when connected to a McIntosh system.
• External EQ Control
The EQ circuit in the MQ112 can be switched
in or out using the front panel knob or by using
the rear panel EQ control trigger. The EQ
control trigger can be connected to a McIntosh
the EQ circuit switches in or out depending on the
• Solid State Front Panel Illumination
The even illumination of the glass front panel
features long life Light Emitting Diodes (LEDs).
This provides even front panel illumination and
is designed to ensure the pristine beauty of the
MQ112 will be retained for many years.
Installation
The MQ112 should be installed upright on its four
feet. Adequate ventilation is important and will aid
in a long trouble-free life of the MQ112. You must
(7.6cm) above the unit and 3 inches (7.6cm) for the
front, rear and sides. Do not remove the feet to
must be openings for cool air to enter (below) and
warm air to escape (above) the MQ112. To aid in
choosing the best location to install the MQ112,
refer to Dimensions on page 9.
Connector Information
XLR Input Connectors
Meter/Tube
Illumination
Control
Power
Control
Ground
XLR Output Connectors
Power Control Connectors
Signal Ground
RCA Connectors
(+) Signal Ground
(-) Signal
2
1
3
(-) Signal
1
2
3
(+) SignalGround
XLR INPUT
XLR OUTPUT
(+) Signal Ground
(-) Signal
2
1
3
(-) Signal
1
2
3
(+) SignalGround
To Next Page
Loading...