Need help?Do you have a question about the McIntosh MA7200 and is the answer not in the manual?
General| Power Output per Channel | 200 Watts |
|---|---|
| Number of Channels | 2 |
| Total Harmonic Distortion | 0.005% |
| Damping Factor | >40 |
| Rated Power Band | 20Hz to 20kHz |
| S/N Ratio (Phono) | 80dB |
| Input Impedance | 20K ohms |
| Voltage Gain (Phono) | 60dB |
| Frequency Response | 20Hz - 20kHz (+0, -0.5dB) |
| Dimensions | 7-5/8" (19.37cm) x 17-1/2" (44.45cm) x 22" (55.88cm) |
| Speaker Impedance | 2, 4 or 8 Ohms |
| Maximum Output Voltage (Balanced) | 16V |
| Maximum Output Voltage (Unbalanced) | 8V |
| Connectivity | 1 Balanced, 6 Unbalanced, 1 Phono (Moving Magnet) |
| Digital Section | 1 USB, 2 Coaxial, 2 Optical |
| Control | RS232, Power Control, Data Ports |
| Shipping Weight | 93 lbs (42.2 kg) |
Details the 200W per channel power output and Autoformer technology.
Explains processing of PCM, DSD, DXD signals from various digital sources.
Describes the Bass and Treble controls and their input-specific memory function.
Explains the patented circuit protecting speakers from amplifier clipping.
Details how the data ports enable remote control of source components.
Details on connecting cables to amplifier output terminals.
Guides on adjusting trim functions like balance and level using the remote.
Instructions for selecting audio outputs (AM/FM) using the remote control.
Guides users through accessing and navigating the MA7200 setup menu.
Lists factory default configurations and their corresponding page numbers for reference.
Explains how to check the main and digital audio circuitry firmware versions.
Details how to turn inputs on/off and rename them for system customization.
Configuration options for the main audio outputs, including switched or always-on states.
Settings for headphone output behavior, including muting other outputs.
Procedures for turning the MA7200 on and switching it to standby mode.
Guides on how to choose and switch between different audio input sources.
Instructions on adjusting the listening level using the unit's controls or remote.
Overview of adjustable settings like Balance, Tone, and Input Level for fine-tuning.
Step-by-step guide to install the necessary USB audio driver on a PC.
Lists the necessary hardware and software for USB input operation.
Lists all components and materials required for safely packing the MA7200.
To Next Page