Need help?Do you have a question about the McIntosh MA9000 and is the answer not in the manual?
General| Power Output per Channel | 300 Watts |
|---|---|
| Total Harmonic Distortion | 0.005% |
| Number of Channels | 2 |
| Input Impedance (Balanced) | 20k ohms |
| Input Impedance (Unbalanced) | 20k ohms |
| Damping Factor | >40 |
| Maximum Output Voltage (Balanced) | 16V RMS |
| Maximum Output Voltage (Unbalanced) | 8V RMS |
| Dynamic Headroom | 2.0dB |
| Connectivity - Unbalanced Input | 6 |
| Connectivity - Phono Input MM | 1 |
| Connectivity - Phono Input MC | 1 |
| Connectivity - Digital USB Input | 1 |
| Connectivity - Digital Coaxial Input | 2 |
| Connectivity - Digital Optical Input | 2 |
| Connectivity - Digital MCT (DIN) Input | 1 |
| Connectivity - Subwoofer Output | No |
| Home Theater PassThru | Yes |
| Tone Controls | Bass and Treble |
| Tone Bypass | Yes |
| RS232 Control Input | Yes |
| Rear Panel Data Port | Yes |
| Rear Panel IR Sensor Input | Yes |
| Frequency Response | +0, -0.5dB from 20Hz to 20kHz |
| Phono Input Impedance | 47k Ohms (MM), 100 Ohms (MC) |
| Voltage Gain (Phono) | 60dB (MM), 60dB (MC) |
| Connectivity - Balanced Input | Yes |
| Connectivity - Variable Output | 1 Balanced, 1 Unbalanced |
| Digital Processing | 32-bit |
| Dimensions (W x H x D) | 17.5 x 9.75 x 22 inches |
To Next Page
