Need help?Do you have a question about the McIntosh MA5300 and is the answer not in the manual?
General| Power Output per Channel | 100 Watts |
|---|---|
| Number of Channels | 2 |
| Total Harmonic Distortion | 0.005% |
| Input Impedance | 20K ohms |
| Speaker Impedance Taps | 8 Ohms, 4 Ohms |
| Preamplifier Output | Yes |
| Tone Controls | Bass and Treble |
| Home Theater PassThru | Yes |
| Headphone Output | Yes |
| Bluetooth | No |
| Frequency Response | 20Hz to 20kHz |
| Rated Power Band | 20Hz to 20kHz |
| Damping Factor | Greater than 200 |
| Digital Inputs | 2 Coaxial, 2 Optical, 1 USB |
| Digital-to-Analog Converter (DAC) | Yes |
| Input Sensitivity | 2.5mV (MM) |
| DAC Resolution | 32-Bit |
| Dimensions | 17.5" (44.45cm) x 6" (15.24cm) x 22" (55.88cm) |
Details on various connectors and cable types used in the MA5300, including XLR, USB, and power control.
Summary of key features of the MA5300, covering power, protection, digital inputs, and sound quality.
Illustrations showing the front, side, and rear dimensions of the MA5300 unit for placement planning.
Instructions and diagrams for custom installation of the MA5300 into furniture or cabinets, including ventilation.
Identification and brief description of all input, output, and control ports on the MA5300 rear panel.
Guidance on connecting various components, categorized by Power Control, Data Control, Audio, and Digital inputs.
Configuration steps for integrating the MA5300 into a multichannel A/V system for passthru audio signals.
Instructions on how to use the MA5300 with a separate power amplifier for bi-amplifying loudspeakers.
Step-by-step guide on preparing and connecting speaker cables to the MA5300 output terminals.
Detailed instructions for using spade lugs or bare wire for secure loudspeaker connections.
Identification and explanation of the functions of each button on the HR085 remote control.
Guide on how to access and adjust various settings using the TRIM button on the remote control.
Explanation of the functions of the MA5300's front panel controls, display, and headphone jack.
Instructions on how to enter and navigate the MA5300's setup menu for customization.
Overview of default settings and how to check the MA5300's firmware version via the setup menu.
Guide to configuring input names and enabling/disabling inputs within the setup menu.
Detailed steps on how to rename MA5300 input sources to custom text up to ten characters.
Procedure to assign specific source components to data ports for remote control functionality.
Steps to assign an input as the passthru input for home theater or multichannel audio systems.
Configuration of USB Automute feature and adjustment of RS232 communication baud rate.
Instructions for switching between Normal and Alternate control codes for the remote.
Settings for disabling the front IR sensor and managing the Auto Off power saving feature.
Steps to reset all adjustable settings on the MA5300 back to their factory defaults.
Instructions for resetting the MA5300's microprocessors if controls stop functioning.
Basic operations including powering the unit on/off, selecting sources, and adjusting volume levels.
Introduction to the MA5300's Trim Functions, used for audio adjustments like balance and tone.
Adjusting input trim levels and configuring the Bass tone control for desired audio output.
Guide to adjusting the audio balance between left and right speakers and verifying settings.
Configuring Treble tone control, switching between Mono and Stereo modes for audio sources.
Settings for controlling the illumination of the power output meters and the front panel display.
Using the HXD feature for headphones and muting the audio output.
Understanding the power output meters and the function of the Power Guard protection circuit.
Connecting an external amplifier and operating the passthru mode for home theater.
Using digital inputs and installing the necessary driver for USB audio playback.
Step-by-step guide for installing the McIntosh USB audio driver and connecting to a computer.
Configuring Windows sound settings and accessing the McIntosh USB audio control panel.
Adjusting sampling rate, bit rate, and buffer size for USB music playback.
Photographic view of the MA5300's rear panel, showing all connections and ports.
Photographic view of the MA5300's front panel, highlighting controls, displays, and meters.
Detailed specifications for power output, harmonic distortion, intermodulation distortion, and preamplifier performance.
Specifications for various input impedances, headphone impedance, and control outputs.
Graphical representation of the MA5300's bass and treble tone control characteristics.
Technical details on digital input formats, sample rates for coaxial, optical, MCT, and USB inputs.
Information on power requirements, AC voltage configurations, and overall standby power consumption.
Physical dimensions, weight, and shipping carton dimensions of the MA5300 unit.
List of packing materials and assembly instructions for securely repacking the MA5300 for shipment.
To Next Page