Need help?Do you have a question about the McIntosh MA5100 and is the answer not in the manual?
General| Frequency Response | 20Hz to 20kHz |
|---|---|
| Input Sensitivity (MM) | 2.5 mV |
| Signal to Noise Ratio (MM) | 70 dB |
| Signal to Noise Ratio (Line) | 80dB |
| Output Impedance | 4, 8, 16 ohms |
| Input Impedance (Line) | 250k ohms |
| Input Impedance (MM) | 47k ohms |
| Total Harmonic Distortion | 0.5% |
| Input Sensitivity (Line) | 250 mV |
| Type | Solid State Integrated Amplifier |
| Power Output | 45 watts per channel |
Details the terms and conditions for a complimentary three-year factory service contract.
Importance of ventilation and instructions for mounting the MA 5100 unit.
How to connect loudspeakers, auxiliary sources, and tape recorders.
Explanation of input source selection and mode control functions.
Details on RMS power output, harmonic, and intermodulation distortion.
Visual representation of the MA 5100's internal signal path and components.
To Next Page
