McIntosh MC452 Connection Diagram

MC452 Connection Diagram
1A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com Part No. 04124300
Note: Refer to the MC452 Owner’s Manual page 8 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - Network/RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
Connect to
AC Outlet
Audio Preamplifier
Right Loudspeaker System Left Loudspeaker System
-
+
-
+

McIntosh MC452 Specifications

General

Number of Channels	2
Total Harmonic Distortion	0.005%
Rated Power Band	20 Hz to 20 kHz
Frequency Response +0,-0.25dB	20 Hz to 20 kHz
Frequency Response +0,-3dB	10 Hz to 100 kHz
Remote Power Control	Yes
Multi-Channel DB25 Cable	No
Voltage Gain	26 dB
Power Guard	Yes
Power Output per Channel	450W
Damping Factor	>40
Inputs Unbalanced	1 pair
Inputs Balanced	1 pair
Input Impedance Unbalanced	20k ohms
Input Impedance Balanced	20k ohms
Power Requirement	120V
Standby Power Requirement	0.5W