13
Rear Panel Connections and Adjustments
Connect to the AC / DC Adapter supplied
with the MT2 Turntable. Then connect the
AC / DC Adapter to a live AC outlet. Refer
to information on the Power Supply to
determine the correct voltage
Audio OUTputs connect to PHONO Inputs of
the Preamplifier, Integrated Amplifier or A/V
Control Center. For specific information on the
type of Phono Input to use, please refer to the
next page
Fine speed adjustments for 33-1/3 and 45 rpm.
These Adjustments require special test records and
precision measurement equipment to accurately
set the speeds. Contact your McIntosh Dealer for
assistance
GND (Ground) connects to GND
(Ground) connection on the Preampli-
fier, Integrated Amplifier or A/V Control
Center
To Next Page
Loading...
