Need help?Do you have a question about the McIntosh MT10 and is the answer not in the manual?
General| Type | - |
|---|---|
| Product color | Black, Green, Silver |
| Nominal speeds | 33 1/3, 45, 78 RPM |
| Signal-to-Noise Ratio (SNR) | 80 dB |
| Frequency range | 20 - 50000 Hz |
Weight and Dimensions| Weight | 19000 g |
|---|---|
| Product dimensions (WxHxD) | 444.5 x 223.8 x 533.4 mm |
Key warnings regarding electrical shock, product exposure to elements, and proper power adapter usage.
Expresses gratitude for purchase and advises recording serial number and purchase details.
Provides contact details for factory repair, technical assistance, and dealer support.
Advice on handling the turntable, proper disposal, and where to find additional product information.
Details on using the Power Control connector and the data/power control cable.
Color coding for connecting cartridge wires to the tonearm headshell.
Highlights advanced cartridges, tone arms, suspensions, and platter rotation for accurate operation.
Details on the moving coil cartridge, tone arm, platter, motor, speed meter, chassis, and illumination.
Diagrams illustrating the front, side, and rear dimensions for location planning.
Instructions for safely unpacking the turntable and its accessories from shipping cartons.
Lists all components found within the accessories box for verification.
Guides on installing the cartridge, setting anti-skate, counterweight, and tone arm height.
Instructions for mounting the turntable platter, applying bearing oil, and leveling the unit.
Procedure for installing a different cartridge, including wiring connections and alignment gauge use.
Setting tracking force and aligning the cartridge using the provided gauge for optimal playback.
Guidance on adjusting the tone arm height to ensure it is parallel to the record surface.
How to adjust the tone arm lift mechanism for proper stylus clearance with different records.
Explanation of trackability forces and how to set anti-skate for optimal performance and minimal wear.
Description of audio outputs, ground connection, and power control remote connections.
Details on connecting the power supply and information on fine speed adjustments.
Instructions for connecting audio cables, ground, and power control cables to a preamplifier.
Guidance on connecting the AC/DC adapter to the turntable and a live AC outlet.
Explanation of the speed switch, platter speed meter, power switch, and record clamp functions.
How to select power modes (Off, Standby, On) and playback speeds (33, 45, 78 rpm).
Procedure for safely raising and lowering the tone arm for record playback.
Detailed specifications for the MCC10 cartridge and the MT10 turntable, including dimensions and weight.
Step-by-step guide on how to properly repack the turntable for shipment to prevent damage.
To Next Page
