McIntosh MT10 User Manual

18
General SpecicationsMT10 Turntable Specications
Overall Dimensions
Width is 17-1/2 inches (44.45cm)
Height is 8-13/16 inches (22.38cm)
Depth is 21 inches (53.34cm)
Note: Tone Arm Height will vary depending on the type
of Cartridge installed.
Weight
42 pounds (19.0Kg) net, 63 pounds (28.6Kg) in ship-
ping carton
Shipping Carton Dimensions
Width is 24 inches (61cm)
Depth is 27 inches (68.6cm)
Height is 25 inches (63.5cm)
Playback Speeds
33 1/3 rpm, 45 rpm and 78 rpm
Motor Type
DC Brushless
MCC10 Cartridge Specications
Output Level
0.5 mV at 5 cm/s
Load Impedance
400 ohms recommended
Frequency Response
20Hz to 50,000Hz
Channel Separation
Greater than 30dB at 1kHz
Compliance
6 x 10
-6
cm/dyne
Recommended Tracking Force
2.4 g
Channel Difference
Less than 0.3 dB
Total Mass
11 g
Stylus
Elliptical Diamond
Cantilever Material
Aluminum
Coil Assembly
Symmetric design
Specications

McIntosh MT10 Specifications

General

Type	-
Product color	Black, Green, Silver
Nominal speeds	33 1/3, 45, 78 RPM
Signal-to-Noise Ratio (SNR)	80 dB
Frequency range	20 - 50000 Hz

Weight and Dimensions

Weight	19000 g
Product dimensions (WxHxD)	444.5 x 223.8 x 533.4 mm