9
10. Carefully slide off the Stylus Guard from the car-
tridge by pulling the cover straight down. Refer to
figures 14 and 15.
Note: The Tracking Force Pressure, Anti-Skating
and other adjustments have been preset at
the factory for optimum performance. For
additional information on setting Track-
Fig u re 14
Stylus
Guard
Cartridge
Figure 13
Tone A rm
Rest
Assembling the Turntable
ing Force Pressure, Anti-Skating and other
adjustments refer to pages 10 thru 12.
11. Proceed to “How to Connect the Turntable” on
page 14.
Figure 15
To Next Page
Loading...
