McIntosh MX150

14
Displays On Screen Functions on the
McIntosh Music Server and a variety
of other McIntosh Components
Remote Control Push-Buttons
Press to Power the MX150 ON
Selects one of the ten
available Audio Sources
Selects a Disc Player, Music Server
or Recorder Function. Seek Sta-
tions Up or Down the AM/FM Dial.
Select AM/FM Station Presets and
performs various functions on a
variety of McIntosh Components
Use to select tuner presets, disc
tracks or any numbered operation
Mutes the audio
Adjusts the volume level up or down
Selects On Screen Functions on a
variety of McIntosh Components
Selects AM Tuner Operating
Functions and Disc Selection on
certain McIntosh Disc Players
Selects FM Tuner Operating Func-
tions and Track Selection on certain
McIntosh CD Players
Press to either change Bands or
Review Presets Stations with an
external McIntosh Tuner connected,
and select certain functions on a
variety of McIntosh Components
Press MODE to switch between Stereo
and Mono Modes. Also allows exiting
out of the setup mode
Turns AC Power ON or OFF to
McIntosh Components when con-
nected to ACC Power Control Jack,
refer to “How to use the Remote
Control” Acc On/Off information
Note: Push-buttons whose function is not identified above are for use with other McIntosh Products.
LED illuminates during the time a
remote command is sent to the MX150
Press TRIM and then the LEVEL
Push-buttons to select and adjust
various functions
Activates the Setup Mode,
used to return to previous
Menu and/or exit the Setup
Mode
Press to Power the MX150 OFF
Use to scroll thru available inputs for Zone A
and B; and phantom Inputs for Zone A
Use to scroll thru available inputs for Zone A
and B; and phantom Inputs for Zone A