mcmurdo Smartfind E8 - HOW DOES IT WORK?

Page 32
NOTE – These instructions are provided to allow you to disable a faulty
EPIRB (see page 18). To replace a battery pack, please contact your local
Approved Service Agent.
2. Twist base of EPIRB
anti-clockwise.
5. Using a 4mm hex key,
unscrew retaining bolt
until loose. Do not
remove at this stage.
6. The battery pack
is held in place by two
waterproof seals. To
release the battery,
pull the cover or screw
firmly.
7. Remove the screw
completely and
dispose of the battery.
3. Remove cover.
4. Untie and remove
carry handle (if fitted).