MCOHome MH-F500 User Manual

→”Next”→
Temperature Differencial Value:
correct indoor temperature. Range: -
10~+10
→”Next”→Brightness: Press +/-
to set the brightness of the screen. 0: Only display current indoor temperature &
in half brightness; 1: Display all contents in half brightness; 2: Display all contents in full brightness.
→”Next”→Time synchronization:
Press +/
device
will synchronize the time automatically. OFF: Once connected to
time. Users need to set by themselves.
7
Temperature Differencial Value:
Press +/-
to set the value added or deleted to make the
10~+10
→”Next”→ Temperature return difference:
Press +/
deleted the value. Range: 0.5~2
to set the brightness of the screen. 0: Only display current indoor temperature &
in half brightness; 1: Display all contents in half brightness; 2: Display all contents in full brightness.
Press +/
-
to switch between ON and OFF. ON: Once connected to
will synchronize the time automatically. OFF: Once connected to
Z-wave, the
device
to set the value added or deleted to make the
device display the
Press +/
- to set the value added or
to set the brightness of the screen. 0: Only display current indoor temperature &
time
in half brightness; 1: Display all contents in half brightness; 2: Display all contents in full brightness.
to switch between ON and OFF. ON: Once connected to
Z-wave, the
device
will not synchronize the

MCOHome MH-F500 Specifications

General

Brand	MCOHome
Model	MH-F500
Category	Thermostat
Language	English