Compressor protect: Compressor delay time setting from 00 to 10 minutes.
EM HEAT MODE: Emergency heat. Default is OFF. Users can set it to ON so that the thermostat will start EM heat
when the outdoor temperature is extremely low so as to protect the outdoor unit.
CHANGE OVER: When change over is ON, the device will start heating or cooling automatically according to the
desired temp. When change over is OFF, the device will not start heating/cooling automatically so as to save energy
when there is nobody at home.
Clean Screen
Press “Menu”→“Next”(press 6times)→”CLEAN SCREEN”→“Done”
To Next Page
Loading...
Need help?
General
