Need help?Do you have a question about the MCP MT8145 and is the answer not in the manual?
Essential safety warnings and guidelines for operating the meter safely.
Identification of main components on the front and rear panels.
Detailed explanation of SELECT, RANGE, SET, MAX/MIN, Timer/RS232, and HOLD buttons.
Description of 2nd VIEW, RELA functions, and terminal definitions.
Details on COM, V Hz, and mA terminals for input and output connections.
Explanation of how to use the function keys to select measurement modes.
Description and meaning of symbols shown on the multimeter's LCD screen.
Setting upper/lower limits and the auto power off feature for efficiency.
How to set time for measurement and the function of the analog bar graph.
Details on using the meter as a square wave generator.
How to select measurement ranges automatically or manually.
Procedures for measuring DC and AC voltages, including milli-voltages.
How to measure AC/DC current, milli-current, and resistance.
Instructions for measuring capacitance, frequency, RPM, and temperature.
Testing diodes, continuity, and using the square wave output function.
Steps for installing software, connecting to PC, and data management.
Digital/analog displays, graph windows, and recorder control panel.
Detailed electrical specs, including ranges, resolutions, and accuracy for various functions.
Guide to replacing fuses and steps for troubleshooting meter issues.
General| Diode Test | Yes |
|---|---|
| Continuity Test | Yes |
| NCV | Yes |
| Data Hold | Yes |
| Backlight | Yes |
| Auto Power Off | Yes |
| AC Voltage | 4V/40V/400V/750V |
| DC Current | 10A |
| AC Current | 10A |
| Capacitance | 100μF |
| Frequency | 10Hz-10MHz |
| Temperature Range | -40°C to 1000°C |
| Battery | AAA |
To Next Page